# Poultry.nz: full text > Broiler sheds for New Zealand and Australia from Karista Insulated Building Solutions Ltd. This file holds the text of every page on https://poultry.nz in Markdown, for AI assistants and search tools. Specifications are from Karista's poultry housing specification for an 18 × 138 m reference shed, the Kristakote 25 coating specification and the Karpet bedding specification, and are indicative until confirmed in a quotation. Contact: Kerry Hayes, Managing Director, Karista. Phone +61 416 651 122. Email kerry@karistagroup.com. Registered office: 20 Henare Place, Tihiotonga, Rotorua, New Zealand. Website: https://www.karistagroup.com --- # Home URL: https://poultry.nz/ Karista · New Zealand and Australia ## Broiler sheds for New Zealand and Australia, from a single panel to a turnkey farm. Insulated panel sheds with automatic vents and pop doors, heating and chilling through the floor, and the controls to run it all. Buy a component, a shell kit or the whole shed, engineered for your site by Karista. - Building shell: Steel frame, insulated panels and doors R 5.15 roof and ceiling, R 3.57 walls - Climate and energy: Air from the walls, heat from the floor Modelled on your site before you order - Lighting and controls: One PLC for doors, vents, fans and light CO2 and ammonia sensed in the shed - Ways to buy: A component, a kit or a turnkey shed Itemised quotes, freight at cost 01 Ways to buy ### One component, a kit, or the whole shed. Every part of the shed is quoted on its own line. Take a single item, the shell, the climate and control systems, or all of it under one contract. Any single item #### Components Panels, doors, vents, fans, lighting or controls on their own, for an upgrade or for your own builder. Includes: The items you choose, with their trims and fixings Suits: Upgrading or extending a shed you already run Built by: Your builder or installer Structure and envelope #### Shell kit The steel frame, the wall, ceiling and roof panels, mouldings, flashings and doors for a weathertight shed. Includes: Engineering, steel, panels, trims and doors Suits: Growers with their own builder and equipment supplier Built by: Your builder, from Karista’s drawings Fit-out #### Climate and controls Ventilation, fans, floor heating and chilling, lighting and one control system, for a new shell or a shed you already have. Includes: Site model, vents, fans, thermal plant, lighting and PLC Suits: New sheds, and refits that come off gas Built by: Your installers; commissioned by Karista One contract #### Turnkey shed The whole shed, from the model of your site to a commissioned building ready for its first flock. Includes: Everything in the kit and the fit-out, delivered and erected Suits: New farms, and new sheds on existing farms Built by: Karista, under one contract 02 Building shell ### A clear-span shed, insulated on every face. A steel frame that stands outside the lining, PIR panel on the walls, ceiling and roof, and a coating made for the air inside a poultry shed. Reference shed #### 18 × 138 m, clear span The shed in Karista’s New Zealand specification: portal frames outside the lining, insulated panel all round, and a 2 m eave along both sides. Floor: 18 × 138 m 2,484 m², no internal columns Height: 2.4 m at the eaves 12° roof pitch Insulation: R 5.15 roof and ceiling R 3.57 walls Coating: Kristakote 25 25-year perforation warranty 03 Climate and energy ### Air from the walls, heat from the floor. Ventilation is kept apart from heating and cooling, so each can be controlled on its own. Air moves by buoyancy. The slab does the heating and the chilling. Heating and chilling #### Heat pumps, a solar roof and two tanks of water Solar modules in the roof run the heat pumps. Fifty thousand litres of stored water carries the floor through the night. Solar roof: 90 kW peak 270 modules Heat pumps: 4 × 62 kW reverse cycle Thermal store: 2 × 25,000 L insulated tanks Ventilation: 20.6 air changes an hour by buoyancy, reference site 04 Lighting and controls ### One controller for doors, vents, fans and light. LED rows, sensors and every actuator in the shed report to the same PLC. One control system #### Every door, vent, fan and LED row on one PLC The controller reads the shed and the weather, then sets the vents, the fans and the light. Lighting: RGB LED strip 19.5 W a metre Sensors: 22 in the shed and 2 outside Controller: Rockwell PLC Beckhoff I/O, touch screen Standards: AS/NZS components throughout 05 The shed in section ### Eighteen metres across, one system at a time. Pick a system. The drawing shows where it sits in the shed. #### Which system? Steel frame Roof and ceiling Walls and pop doors Ventilation Destratification fans Floor heating and chilling Solar roof Lighting and controls Clear-span steel frame Portal frames stand outside the wall panels and carry the eaves, so nothing interrupts the floor or the lining. Span: 18 m clear Length: 138 m, in 23 bays of 6 m Finish: 100 µm epoxy; galvanised purlins Schematic section of the 18 m reference shed. Panel thicknesses are drawn larger than scale. 06 For New Zealand and Australia ### Specified for New Zealand and Australian farms. How the specification answers what growers here are dealing with: the cost of heat, shed air on steel, biosecurity and local electrical standards. Ammonia · urea · UV #### A coating made for shed air Kristakote 25 was developed in consultation with Beckers for the ammonia and urea inside a poultry shed and the sun outside it: 30 µm of PVDF on the weather side and 50 µm of polyurethane on the lining, both over heavy-galvanised steel. 88% of shed energy #### Heat without gas EECA’s technology scan for poultry growers puts heating at 88% of the energy a New Zealand shed uses, most of it LPG and natural gas. Here the heat comes from heat pumps, a solar roof and stored water. Source: EECA, Poultry Growing Technology Scan R 5.15 · R 3.57 #### Insulated on every face PIR panel forms the walls, the ceiling and the roof. Walls are R 3.57. Roof and ceiling together are R 5.15 or better. No visible fasteners #### Built to be washed Walls and ceiling are flat steel with concealed fixings, and every internal corner is closed with a food-grade PVC moulding, so dust and litter have nowhere to lodge. H5 in wild birds, 2026 #### Closes from the control screen H5 bird flu was confirmed in wild birds in Australia and New Zealand in 2026. Pop doors and side vents shut from the controller, and the ridge vents are screened with 3 mm stainless steel mesh. Source: MPI, bird flu and the risk to New Zealand AS/NZS · 3-phase #### Electrical to local standards Switchboards, control boxes, sensors and cabling are built from components that comply with AS/NZS standards, around a Rockwell PLC with Beckhoff I/O. 07 Karista ### Insulated panel specialists since 2003. Karista has designed insulated panel plants and metal building systems for manufacturers since 2003. Karista Insulated Building Solutions was set up in New Zealand in 2019 to apply that to one building: the broiler shed. the year Karista began consulting to panel and metal building makers: 2003 where Karista has delivered projects: 30+ countries on one PIR panel line: Karista’s first commission, and a world first: 12 products in engineering, panel chemistry, materials and design: 5 senior consultants Chartered engineering: CPEng (Engineers Australia), P.Eng PIR chemistry and process safety Coatings, corrosion and materials testing Patented Cam-Lock panel joint, the norm in Gulf cold stores 08 How it works ### From your site to a commissioned shed. Six steps, one contact. #### Send the site and the shed Where the farm is, how many sheds and what size, conventional or free-range, your power supply and what you heat with now. #### Your site is modelled A computational fluid dynamics model runs your shed on your site through each month of the year: air movement, temperature, humidity, CO2 and ammonia. It takes about 25 days. #### An itemised specification and quote Steel, panels, doors, ventilation, heating and chilling, lighting, electrical work and freight are priced line by line, so you can take out what you do not need. #### Manufacture and shipping Each order is made, packed into containers and shipped. Karista works with the freight forwarder and passes on freight, duties and clearance at cost. #### Erection and commissioning A turnkey shed is built and commissioned under one contract. With a kit, your builder erects the shell, and Karista commissions the controls and the heating and chilling plant. #### Warranty and support Goods carry a 12-month warranty. Panel coatings carry the coil coater’s 25-year warranty against perforation. The control system can be reached remotely for support. Your contact ### Talk to Kerry Hayes. Kerry Hayes is Karista’s managing director and the second generation of New Zealand’s Hayes engineering family. He has spent more than 45 years in rollforming, insulated panels and metal building manufacture, so the first conversation can start at the drawings. Phone: +61 416 651 122 Email: kerry@karistagroup.com LinkedIn: Kerry Hayes on LinkedIn 09 Questions ### What growers ask. Ask Kerry for anything not covered here. Can we buy only the panels, or only the doors? Yes. Any item in the range is supplied on its own: wall, ceiling and roof panels, pop doors, side and ridge vents, fans, lighting or controls. Tell Kerry what the shed needs and he will quote those lines. Will it fit a shed we already have? Vents, pop doors, destratification fans, lighting and controls can be fitted to an existing shed, and panels can re-line it. Floor heating and chilling is cast into the slab, so it belongs in a new shed or a new floor. What sizes do you build? The reference shed is 18 m wide and 138 m long, in 23 bays of 6 m, with a 2.4 m eave. The frame is engineered for each order, so width, length, bay spacing and height follow your site and your bird numbers. Conventional or free-range? Either. A free-range shed adds automatic pop doors along the walls: 46 on the reference shed, each with a 2,300 × 450 mm opening. They open and close from the controller. Does the shed need tunnel fans? On the reference site in New Zealand the model showed 20.6 air changes an hour by buoyancy alone, with no forced ventilation needed in any of the conditions at that site. Every site is modelled before the ventilation is specified. If a hotter site needs more air or more cooling, the specification changes before you commit. How is the shed heated without gas? Reverse-cycle heat pumps heat or chill two 25,000 litre water tanks, and pumps send that water through pipes in the slab. Solar modules in the roof run the heat pumps in daylight, and the grid covers the rest. What does the 25-year coating warranty cover? Perforation of the coated steel. It is the coil coater’s warranty, issued for each project, and its terms depend on the site: the sample warranty for New Zealand covers sites more than 2,000 m from the sea. Plan to wash the panels down at least once a year. Where is it made? Steel and insulated panels are made by manufacturing partners offshore and shipped in containers. Pop doors and side vents are fabricated in New Zealand to Karista’s design. The destratification fans are made in the United States. Who builds it? With a turnkey shed, Karista does: one contract covers engineering, supply, delivery, erection and commissioning. With a shell kit, your own builder erects it from Karista’s drawings. What does a shed cost? It depends on the size, the site and how much of the system you take, so there is no list price. Quotes are itemised by system, and freight is charged at cost. How long does it take? As a guide, steel and panels reach site about 11 weeks after the order. The heating and chilling plant is the longest item at about 22 weeks, so it is ordered first. Lead times are confirmed with each quote. Can the outside be a colour other than green? Yes. Exterior panels are coated to order, and the outside can carry a printed finish under a clear coat. One of the sheds pictured is printed as timber. Do you supply bedding? Karista has specified a pine shaving for these sheds, called Karpet: 20 mm deep over a heated and chilled floor, and 50 to 75 mm deep in a conventional shed. Ask Kerry about supply in your region. Contact ### Send the site and the shed. Get a specification and a quote. Tell Kerry where the farm is, what you want to build and how much of it you want from Karista. A site plan and a shed size are enough to start. Managing Director, Karista: Kerry Hayes Phone: +61 416 651 122 Email: kerry@karistagroup.com ### ### ### --- # Building shell URL: https://poultry.nz/#shell Building shell ## Steel frame, insulated panels and doors A clear-span portal frame with PIR panel on the walls, the ceiling and the roof. Buy the panels, the whole shell as a kit, or the shell as part of a turnkey shed. Span: 18 m clear, with no internal columns Insulation: R 5.15 roof and ceiling together; R 3.57 walls Coating: 25 years warranty against perforation Lining: Flat steel with no visible fasteners Frame ### A clear span, with the steel outside the lining. Portal frames at 6 m centres carry the roof and a 2 m eave along both sides. The columns stand outside the wall panels, so the inside of the shed is flat panel from the floor to the ridge. Clear span: roof steel over the slab, before the panels go on. Columns outside the wall panel, carrying the eave. Type: Clear-span gable portal frame, pre-engineered Clear width: 18 m Length: 138 m, in 23 bays of 6 m Clear eave height: 2.4 m Roof pitch: 12° Eaves: 2 m roof overhang along both sides, carried by the frame Fabricated steel: 100 µm epoxy coating Built-up sections in ASTM A572 Grade 345 or EN 10025 S355 Purlins: Cold-formed, galvanised to Z275, left unpainted Fixings: Galvanised anchor bolts and hot-dip galvanised high-strength bolts Bracing: Cable cross-bracing, and a 3 m braced zone at the ridge that also guides the air Design: Engineered for each order and the loads of its site Panels ### Three panels, one coating system. Wall, ceiling and roof are all PIR sandwich panel with steel on both faces, 1,000 mm wide. Wall, ceiling and roof panels in section, drawn to one scale. | | Wall panel CW 1000/75 | Ceiling panel CW 1000/40 | Roof panel 45/250 | Core | 75 mm PIR | 40 mm PIR | 60 mm PIR, plus 45 mm ribs | R-value | R 3.57 | R 1.9 | R 3.17 | Weather skin | 0.5 mm steel, PVDF 30 µm | 0.5 mm steel, PVDF 30 µm | 0.5 mm steel, 45/250 trapezoidal, PVDF 30 µm | Lining skin | 0.6 mm flat steel, polyurethane 50 µm | 0.6 mm flat steel, polyurethane 50 µm | 0.6 mm steel, polyurethane 50 µm | Cover width | 1,000 mm | 1,000 mm | 1,000 mm | Fixing | Concealed | Concealed joint | To purlins, on a frame that carries the eaves Roof and ceiling together give R 5.15 or better. Corner mouldings, flashings, barges, gutters, downpipes and ridging come with the panels. Coating ### Kristakote 25. A coil coating system specified for poultry sheds: PVDF outside for sun and weather, and a high-build polyurethane inside for ammonia, urea and washing down. Weather side: PVDF two-coat system, 30 µm A 10 µm anti-corrosive primer and a 20 µm PVDF top coat, by Beckers Lining side: Unibond Endura polyurethane, 50 µm A 25 µm anti-corrosive primer and a 25 µm top coat Steel: Heavy-galvanised, G90 / Z275 Core side: 5 to 7 µm epoxy primer, compatible with the PIR foam PIR core: 40 kg/m³, give or take 4 Colours: RAL 9003 white inside; exterior to order Warranty: 25 years against perforation The coil coater’s warranty, issued per project. The sample for New Zealand covers sites more than 2,000 m from the sea. Lining ### Nowhere for dust to sit. The ceiling and walls are flat steel with concealed fixings, and every internal corner is closed. Ceiling panels. Flat steel, with no screws or fasteners on show. Every internal corner is closed with an extruded food-grade PVC moulding on concealed fixings. The mouldings are anti-bacterial and anti-fungal, and they wash down with the panels. Printed finishes ### A shed that does not have to look like one. Karista prints directly onto the coated steel and seals the image under a ceramic clear coat made for strong sun. Timber, printed on steel. Wall panels with a direct-to-metal image, on a shed with pop doors and side vents. Direct-to-metal imaging carries a 15-year warranty. Doors ### Pop doors, sliding doors and access doors. All three are insulated panel doors. Pop doors and side vents share the same actuators and control boxes. Pop door, open: the leaf lifts on two linear actuators. A pop door assembled on its wall panel, before delivery. #### Pop doors Opening: 2,300 × 450 mm Leaf: 2,365 × 500 mm insulated panel, R 3.57 Drive: Two linear actuators, run from the controller Frame: Galvanised steel, mill finish or powder coated Testing: Cycle tested 10,000 times without a fault Made: Fabricated in Hamilton, New Zealand, to Karista’s design #### Sliding doors Clear opening: 3,800 × 2,380 mm Leaf: 75 mm PIR, R 3.57 Slides: To the left or to the right Fixing: External, on a stainless steel (AISI 304) frame with a floor guide #### Access doors Clear opening: 800 × 1,750 mm Leaf: 50 mm PIR, R 2.38 Hung: Left or right hand Options: Code lock; a 400 × 400 mm window in a stainless steel frame Climate and energy ### Then give it air and heat. Side vents, ridge vents, destratification fans and a heated and chilled floor complete the shell. An automatic side vent. Solar modules set into a roof. Contact ### Send the shed size and the site. Width, length, eave height and the number of sheds, and where the farm is. Kerry will come back with a specification for the shell and a quote. Managing Director, Karista: Kerry Hayes Phone: +61 416 651 122 Email: kerry@karistagroup.com ### ### ### --- # Climate and energy URL: https://poultry.nz/#climate Climate and energy ## Ventilation, heating and chilling Air moves through the shed by buoyancy. Heating and chilling come up through the floor, from heat pumps run by the roof. Each is controlled on its own. Ventilation: 20.6 air changes an hour by buoyancy, on the reference site Side vents: 42.64 m² of adjustable opening, across 50 vents Solar roof: 90 kW peak about 360 kWh a day Thermal store: 50,000 L of water in two insulated tanks The idea ### Keep the air and the heat apart. In most sheds one stream of air has three jobs: bring in fresh air, carry heat in winter and take heat away in summer. The jobs pull against each other, and the result is a high energy bill and controls that are hard to balance. Karista’s design gives each job its own system. Air changes by buoyancy, in at the walls and out at the ridge. Low-speed fans stop warm air pooling under the ceiling. Heat is added or taken away through the slab, in the 400 mm above the floor where the birds live. Ventilation ### In at the walls, out at the ridge. Fifty automatic side vents let air in. Twenty-three ducted openings along the ridge let it out. The controller sets the open area. Side vent. Louvre blades over an insulated panel, driven by linear actuators. The blades adjust to suit the roof angle. #### Side vents Number: 50: one in every bay on each side, and two on each end Size: 2,000 × 500 mm, with a 1,895 × 450 mm opening Open area: Up to 42.64 m² across the shed, infinitely adjustable Blades: Set to suit the roof angle Drive: Two linear actuators on each vent, run from the controller Panel: 75 mm insulated, R 3.57 Frame: Galvanised steel, mill finish or powder coated Made: Fabricated in Hamilton, New Zealand, to Karista’s design #### Ridge vents Number: 23 ducted openings, one to a bay Open area: 1.15 m² each, 26.45 m² in all Duct: Insulated, through a sealed roof cavity Screen: 3 mm stainless steel mesh Roof cap: Keeps rain and light out Access: The frame lifts out from inside, for work in the ceiling cavity Air mixing ### Fans that return warm air to the birds. Warm air rises to the ridge and stays there. Destratification fans send it back to the floor, slowly enough that the birds feel no draught. Number: 46, two to each bay Model: Airius Model 25 EC, with a 9 inch PHI cell Mounting: In the ridge ceiling panel, tilted 10° from vertical Air speed: Low, so it neither lifts dust nor chills the birds Control: Variable speed from the PLC, on a 0 to 10 V signal Each fan carries a photohydroionisation (PHI) cell that treats the air passing through it. The cell’s maker reports reductions of 97% in airborne bacteria, 97% in airborne mould and 85% in odour in its own tests. Ask Kerry for the test reports. Site model ### Modelled on your site before anything is ordered. A computational fluid dynamics model of your shed, at your location, for each month of the year. It takes about 25 days. #### What the model reports Air speed through the shed, and its cooling effect on the birds How wind moves around nearby buildings, structures and trees Temperature, pressure and humidity Solar gain on the building Air changes and contaminant levels CO2 and ammonia in different parts of the shed What the destratification fans do to the temperature profile Heat from the sun, the weather and the birds On the reference site in New Zealand the model showed 20.6 air changes an hour by buoyancy, with no forced ventilation needed. Heating and chilling ### The slab heats and chills the shed. Solar modules run reverse-cycle heat pumps. The heat pumps heat or chill two tanks of water. Pumps send that water through the slab. Solar roof 90 kW peak Inverters grid-connected Heat pumps 4 × 62 kW Thermal store 2 × 25,000 L Heat exchanger plate type Slab loops heat or chill In daylight the roof runs the heat pumps, and they bring the tanks to their set temperature. When the floor calls for heat or cooling, pumps send water from the tanks through pipes in the slab. The tanks are the battery: they hold the temperature until the sun comes back, and mains power covers the gap. Chilling the slab cools the birds where they stand. Warming it helps the litter dry from below. Solar roof: 270 modules of 330 W, about 90 kW peak Daily yield: About 360 kWh of electricity Heat pumps: 4 reverse-cycle units of 62 kW, synchronised in pairs Heating or chilling: About 1,150 kWh a day from that electricity, at a COP of 3.2 Thermal store: 2 insulated tanks of 25,000 L, above ground At seasonal peaks: Both tanks hot, or both cold Mid-season: One tank hot and one cold, to keep the temperature constant Pumps: 4 variable-speed drives of 22 kW Heat exchanger: One plate-type unit Water treatment: In-line filtration and chemical dosing Backup: Grid-connected inverters: mains power runs the pumps and heat pumps when the sun does not By others: The pipework cast into the slab is laid by your hydronics contractor The plant, as drawn for the reference shed. Two tanks, four heat pumps and a control room at one end, with pipe loops in every bay of the slab. Solar roof ### Modules in place of roof panel. Karista Solar-Plus sets photovoltaic modules flush into the roof, one row to a bay. Modules from below, carried on the purlins. A Solar-Plus panel between roof panels. Module: 330 W polycrystalline, 72 cells Layout: One row to a bay: 23 rows of 22 m, 506 m² in all Frame: Powder-coated aluminium extrusion, flush with the roof Glass: High-transmission, tempered Wind load: 2,400 Pa static Junction box: IP 67, with three bypass diodes Bedding ### Less litter over a conditioned floor. With the slab doing the heating and cooling, the litter can be thinner. Karista has specified a treated pine shaving for both kinds of floor. Karpet 20: 20 mm deep, for heated and chilled floors Karpet 50: 50 to 75 mm deep, for sheds heated from overhead Timber: Radiata pine Moisture: 7 to 9% by mass Shaving: 0.3 mm thick, 6 to 10 mm wide, 5 to 25 mm long Fines: 2 to 4% by volume Bark and contaminants: Less than 1% by volume Treatment: Photohydroionisation, in line Density: 40 kg/m³ loose, 160 kg/m³ baled Karpet is a Karista specification. Ask Kerry about supply in your region. Evidence ### What the trials and the energy agency report. Published results for the three ideas this design rests on. Destratification #### Up to 40% less gas A trial by Scolexia recorded gas savings of up to 40% in sheds fitted with destratification units, along with lower mortality, less feed and better weight gain than the control sheds. Source: Scolexia, reported in Poultry Digest, February/March 2015 Floor heating and cooling #### About 3% more weight on 3% less feed A study of a heated and cooled floor reported weight gain up by about 3%, feed consumption down by about 3% and mortality roughly halved, against the control part of the same building. Source: Archiv für Geflügelkunde 74 (2), 2010 Shed energy #### Underfloor heat keeps litter dry EECA’s scan of poultry growing technology rates underfloor hot-water heating among the most efficient ways to heat a shed, notes that it keeps litter dry, and gives heat pumps a COP of 3 to 6. Source: EECA, Poultry Growing Technology Scan Contact ### Start with a model of your site. Send the location, the shed size and what you heat with now. Kerry will come back with what the model needs and a quote for the climate and control systems. Managing Director, Karista: Kerry Hayes Phone: +61 416 651 122 Email: kerry@karistagroup.com ### ### ### --- # Lighting and controls URL: https://poultry.nz/#controls Lighting and controls ## LED lighting, sensors and one PLC Every pop door, side vent, fan and LED row is run by the same controller, from the same sensors. Lighting: 19.5 W/m RGB LED strip, variable spectrum Sensors: 24 22 in the shed and 2 outside Controller: One PLC for doors, vents, fans and light Standards: AS/NZS components throughout Lighting ### LED rows, flush with the ceiling. Full-length RGB strips in aluminium extrusions, set across the shed. Colour and level are set from the controller. Type: RGB LED strip with a variable spectrum, made for broilers Power: 19.5 W a metre Rows: 18 m long, across the shed; 23 or 46 rows, depending on the coverage you want Housing: Powder-coated aluminium extrusion, flush with the ceiling Drive: A 24 V DC supply, with RGB drivers and PWM control Outside: A 2 m strip at the end of each row, under the eaves Sensing ### Twenty-four sensors. Temperature, humidity, pressure, CO2 and ammonia are measured in the shed, with temperature and humidity outside for reference. Temperature: 6 in the shed Humidity: 4 relative humidity Pressure: 4 negative pressure CO2: 4 Ammonia: 4 Outdoor: 2 temperature and humidity Control ### A Rockwell PLC, programmed and commissioned. The control system is supplied complete: switchboard, control boxes, cabling, programming and a touch screen. Controller: Rockwell PLC with Beckhoff I/O Operator screen: Touch-screen HMI, with a PC and screen Doors and vents: A control box for each pop door and side vent pair, 50 in all Fans: Variable speed for all 46 fans, with separate control of their PHI cells Switchboard: 63 A three-phase, in lockable steel cabinets Switch room: Insulated and purpose-built, with data outlets and fibre Remote access: For maintenance and support Standards: All components comply with AS/NZS standards Included: PLC programming, cabling, sensors and commissioning What it runs ### Everything that moves, from one screen. Counts are for the 18 × 138 m reference shed. side vents: 50 open area set to the weather and the birds pop doors: 46 on a free-range shed destratification fans: 46 speed and air treatment LED rows: 23 or 46 colour and level through the day Contact ### Ask what the controller would run on your farm. Tell Kerry how many sheds you have, what is in them now and what you want to automate. Managing Director, Karista: Kerry Hayes Phone: +61 416 651 122 Email: kerry@karistagroup.com ### ### ### --- # Ways to buy URL: https://poultry.nz/#supply Ways to buy ## A component, a kit or a turnkey shed Karista quotes every part of the shed on its own line. You choose how much of it to take. Any single item #### Components Panels, doors, vents, fans, lighting or controls on their own, for an upgrade or for your own builder. Includes: The items you choose, with their trims and fixings Suits: Upgrading or extending a shed you already run Built by: Your builder or installer Structure and envelope #### Shell kit The steel frame, the wall, ceiling and roof panels, mouldings, flashings and doors for a weathertight shed. Includes: Engineering, steel, panels, trims and doors Suits: Growers with their own builder and equipment supplier Built by: Your builder, from Karista’s drawings Fit-out #### Climate and controls Ventilation, fans, floor heating and chilling, lighting and one control system, for a new shell or a shed you already have. Includes: Site model, vents, fans, thermal plant, lighting and PLC Suits: New sheds, and refits that come off gas Built by: Your installers; commissioned by Karista One contract #### Turnkey shed The whole shed, from the model of your site to a commissioned building ready for its first flock. Includes: Everything in the kit and the fit-out, delivered and erected Suits: New farms, and new sheds on existing farms Built by: Karista, under one contract Compare ### What each one includes. Filled squares are included. Open squares can be added to your order, or bought on their own. | | Components Any single item | Shell kit Structure and envelope | Climate and controls Fit-out | Turnkey shed One contract | Building shell | Engineering and drawings for your site | Available | Included | Included | Included | Steel frame and purlins | Available | Included | Not included | Included | Wall, ceiling and roof panels | Available | Included | Not included | Included | Mouldings, flashings and gutters | Available | Included | Not included | Included | Pop doors, sliding doors and access doors | Available | Included | Not included | Included | Climate and energy | CFD model of your site | Not included | Available | Included | Included | Side vents and ridge vents | Available | Available | Included | Included | Destratification fans with PHI | Available | Not included | Included | Included | Floor heating and chilling plant | Not included | Not included | Included | Included | Solar roof | Available | Not included | Included | Included | Lighting and controls | LED lighting | Available | Not included | Included | Included | Switchboard, sensors and PLC | Available | Not included | Included | Included | Delivery and building | Shipping and delivery to site, at cost | Included | Included | Included | Included | Erection on site | Not included | Not included | Not included | Included | Commissioning | Not included | Not included | Included | Included Included Available: add it, or buy it on its own Not part of it How it works ### From your site to a commissioned shed. Six steps, one contact. #### Send the site and the shed Where the farm is, how many sheds and what size, conventional or free-range, your power supply and what you heat with now. #### Your site is modelled A computational fluid dynamics model runs your shed on your site through each month of the year: air movement, temperature, humidity, CO2 and ammonia. It takes about 25 days. #### An itemised specification and quote Steel, panels, doors, ventilation, heating and chilling, lighting, electrical work and freight are priced line by line, so you can take out what you do not need. #### Manufacture and shipping Each order is made, packed into containers and shipped. Karista works with the freight forwarder and passes on freight, duties and clearance at cost. #### Erection and commissioning A turnkey shed is built and commissioned under one contract. With a kit, your builder erects the shell, and Karista commissions the controls and the heating and chilling plant. #### Warranty and support Goods carry a 12-month warranty. Panel coatings carry the coil coater’s 25-year warranty against perforation. The control system can be reached remotely for support. Lead times ### The heating plant sets the programme. Indicative figures from Karista’s reference quotation. Lead times are confirmed with each quote. Days from order to delivery or dispatch CFD model of your site before the order 25 days Side vents and ridge vents made in New Zealand 41 days Pop doors made in New Zealand 51 days Switchboard, sensors and PLC 70 days Steel frame and insulated panels including shipping 76 days Destratification fans including shipping 76 days LED lighting 120 days Heating and chilling plant including shipping 155 days 0 40 80 120 160 days Terms ### Itemised quotes, freight at cost. Quotations: Itemised by system, and valid for one month Freight: Shipping, duties, clearance and delivery to site, charged at cost Goods warranty: 12 months Coating warranty: 25 years against perforation, from the coil coater The full terms of sale come with each quotation. Contact ### Tell Kerry how much of the shed you want. One item, the shell, the systems or the whole building. Send the site and the shed size and he will quote it line by line. Managing Director, Karista: Kerry Hayes Phone: +61 416 651 122 Email: kerry@karistagroup.com ### ### ###